#Repair macbook pro cable driver#
#Repair macbook pro cable skin#
#Repair macbook pro cable full#

If you have a replacement cable, it is a good idea now to compare your new cable with the old one. The black plastic film that covers the battery connector. I used a combination of my thumb nails and a spudger to remove this. It might be a tight fit, but it isn’t glued or snapped in place. Pull off the film and pop off (in a motion going straight up) the battery connection. For this model laptop, the connection was on the right side of the board, covered by a black plastic film. Next, disconnect the cable leading from the battery to the motherboard. I used a can of compressed air, paying particular attention to the location of the ribbon cable. You’d be surprised of what you can find rolling around sometimes. Once the panel is off, it is a good idea to look everything over before blowing the dust off. Fortunately, the cable is within easy reach. Use a left-right motion (like turning a steering wheel), instead of a back and forth motion. If you feel resistance, use a slight back and forth twisting motion to pop the panel loose. It doesn’t matter where you start in this case, a corner or any place that you can get your fingernails or a spudger in, as long as you do so GENTLY. This prevents accidental scratches or something critical being embedded in the carpet. Tip: keep some sort of utility dish or plastic bowl near by for small screws and parts, so you don’t have them strewn all about your work surface.

#Repair macbook pro cable skin#

If any of the other 8 longer screws were used instead, their heads will stick slightly above the panel, potentially snagging on skin or clothes.

When returning the screws, the two shorter ones will need to go back to these holes. For us, two screws situated near the hinge were shorter than the rest. Pay attention to the lengths of the screws as you remove them, and make a mental note of any oddball lengths that you come across. The toolkit and ribbon both arrived second-day.įirst, remove all of the screws securing the back panel with the pentalobe driver. We had hoped the “easy fix” would resolve things, but unfortunately they did not. But a few dollars and a new strip of copper-laden plastic will buy my wife peace of mind, so therefore it was a good buy.Īs suggested by several places online, resetting both the PRAM and SMC were done first. I am usually against premature purchases, especially when I have not determined the exact problem. That evening my wife purchased a “MacBook repair kit” similar to the photo below, as well as a new ribbon cable.

#Repair macbook pro cable driver#

The screws needed a pentalobe P5 driver bit. I was not able to preform an exploratory surgery, as I did not have the appropriate driver bit to remove the screws securing the back panel. Considering this MacBook was purchased in 2015, we were hoping the latter won’t be in order. Common enough that you have an extremely large swath of results ranging from the less intrusive (resetting the PRAM) to the more extreme (replacing the ribbon cable) to giving Last Rites and scheduling a trip to the Apple Store for a replacement. Surprisingly, or to put it more accurately, alarmingly this appears to be a common problem for MacBooks. However, later that evening, much of the inconsistency resolved itself. It makes troubleshooting a pain in the butt because you spend a fair amount of time simply attempting to duplicate the problem.

Repair technicians really, REALLY hate when a problem is inconsistent. Glide a finger across the surface, maybe the cursor will move.

Specifically, inconsistent issues with trackpad responding to action. She was upset that her new’ish MacBook Pro was having problems with the trackpad.

#Repair macbook pro cable full#

For full disclosure, I am NOT a Mac person. This blog entry will only cover swapping out the trackpad ribbon cable, as it resolved our issue immediately. Unfortunately, the fixes found online seem to run the gamut from resetting the PRAM, to resetting the PRAM + SMC, swapping out the trackpad ribbon cable AND resetting both the PRAM and SMC. Thank you.Before I get started, this appears to be a known issue for this model of laptop.

It is compatible, but not same， Do not choose Mag2 T. Mag1 L = For macbook before Mid-2012 Year Models. Repair Cable DC Power Adapter Cable For Macbook Air / Pro Power Adapter Charger Power Cable 45W 60W 85W Replacement Adapterĭescription Condition:New Quality: Grade A QC: TEST 1 by 1 before shipping Warranty: 12 Month Compatible: For Macbook Power Adapter Charger Cable Repair Cable Package include: 1pc* Repair Cable + 25cm 0.8mm Solder Wire Anttention: 60W,45W,85W are compatible, We will send 60W,Please check your laptop power adapter model details before order.